13 March 2021

DIY Door 2


Ystros guards the entrance to the crypt. He's pretty sure there's some kind of Slaanesh orgy going on inside, but he's been banished for admitting he doesn't like pink.

I won't bore you with the door's construction details (and there was much rejoicing). The new door was built the same way as the first one, with one major change: 


It fits properly. I did a far better job measuring and cutting away the bottom bits this time and used two horizontal coffee sticks to cover the lower part of the chipboard. The door wedges into the space pretty well, so I don't have to worry about gluing it in and can remove it if needed.


After painting it black with more cheap craft paint, I sliced up some cardboard from a cereal packet to make the metal reinforcing bits, for which I'm sure there's a technical name. Once the PVA had dried I painted them black. 


I gave it a couple of coats of thinned Mahogany Brown and several washes with Sepia and Burnt Umber. It was at this point I remembered about the orange-brown look, but too late.


With the washes dry the door was drybrushed with a mix of Mahogany Brown and Flat Earth and given another wash, this time with Black. I upped the amount of Flat Earth and gave it another drybrush and wash and it's starting to look the way I want. I gave it one final highlight with Flat Earth lightened with some Light Brown, a last wash with more Black, and then a coat of matte varnish.


The metal bits were redone with black paint and dabbed with several layers of Dry Rust and Orange Brown to add some texture. I tried to work out how to do studs without having to make lots of little dots of greenstuff, couldn't, so didn't bother. Then I cracked out the flocking and added some across the bottom and on some of the panels to match it to the ruins. 


Aaaand it's crooked. Luckily this is because it's not quite in right, honest. It would have benefited more if I'd taken the time to mark out where the black strips better, but if you wanted precision you'd be on someone else's blog. I'm really happy with it, and as you can see from the top photo it's a much better look than a blurry coffee mug.

6 comments:

  1. Nicely done. For door studs, I've used the heads cut off dressmaking pins, which work quite well and mean they're all a uniform size and shape.

    ReplyDelete
    Replies
    1. Thanks! Pin heads would work really well, I'll have to pick up a pack of pins and try it.

      Delete
  2. Very nice and will keep the draught out (nothing worse than a draught during an orgy! I imagine).

    I was going to suggest dressmakers pins, but Jez has beaten me to it, so how about a door handle from a small ring of wire and a blob of greenstuff?

    Love the colours by the way, spot on, and the flocking.

    Cheers Roger.

    ReplyDelete
    Replies
    1. Thanks, Roger, I really enjoyed doing the weathering and flocking. I had to stop myself from doing too much of it. Jez is right about the studs, and you're right about a handle. I'll see what I can do.

      Delete
  3. Very effective looking door Matt, a door handle and hinges would add to the overall effect

    ReplyDelete
    Replies
    1. Yeah, I kind of forgot about the hinges and handle... I'll see if I can add them.

      Delete