15 March 2023

Calden Keep: Wolf of Calden and Accursed Destrier

The Wolf of Calden commanded the final defence of Calden Keep against the peasant uprising. Slaughtered by the enraged citizens, he's risen from the dead to seek vengeance against those who hacked him down.

This holds the record for ordering from Etsy, as it took me around 0.1 nanoseconds to add the Wolf and his horse to my shopping basket. He was part of my Christmas order and is easily the most awesome sculpt of all the Calden Keep minis I bought. So, here we go!

As the Wolf is separate from the Accursed Destrier (that's how it's spelled in the official lore), I painted them separately, starting with the Destrier. I glued it to a 60mm base, stuck four pennies to the underside to add some heft and then sprayed both models with grey primer.

I considered black for the horse, but then decided on a much paler colour. Pallid Wych Flesh seemed the way to go, so I began applying it in thin coats and it only took three to cover the gray primer and give the Destrier an undead look.

Next I blocked in its mane and tail using Black highlighted with Charcoal and Neutral Gey, and then I did the saddle strap with Chocolate and Mahogany Browns and some Seraphim Sepia. The metalwork is Iron Warriors, Nuln Oil and Agrax Earthshade.

With the basic skin done, it was time for shading and I was utterly stuck on which way to go. Grey? Purple? Green? Black? I went with one of Citadel's newer shades, Beserker Bloodshade, which is a darker red than Carroburg Crimson. After thinning it with Lamian Medium, I used a medium makeup brush to swirl it all over the model and put it to one side to dry.

The Wolf's paint scheme is the usual red/metal/brown, kicking off with Iron Warriors, Nuln Oil and Agrax Earthshade all over his armour. I lightly drybrushed it with Leadbelcher to bring out the details on the plates, and then hit his cloak with Dark Red, more Nuln Oil and Red.

Like the Ranged Deliverers, the Wolf has wrappings under his armour. Instead of doing them in the same Off-White I used Chocolate and Mahogany browns as I wanted to keep the rider darker than the horse. 

The fur on his saddle and under his armour got a coat of Charcoal and highlights with Neutral and Ghost Greys, and the saddle was painted the same way as the other leather.

The final touch was to dab some Pallid Wych Flesh and more Berserker Bloodshade onto his face, paint his eye sockets Black and his pupils White and then paint his stirrups with more browns.

I was given a harsh reminder of how brittle these 3D prints are when I managed to break off not only the top of the Wolf's weapon but also the haft. Superglue and patience came to the rescue, but it was a pain to repair. Once given a coat of matte varnish, he was put to one side.

Back to the Destrier. It looks a tad pink and would fit into a Slannesh army, but this isn't a Slaanesh army. I cracked open the Pallid Wych Flesh and layered it on, and then did the same with some Off-White. This lightened the colour to the point where I thought I could get away with a translucent skin over meat look, and that's good enough for me.

Its mouth was washed with pure Beserker Bloodshade and the fearsome teeth were given a once-over with Off-White. I think they need more definition so I might run some Nuln Oil between them at some point. Its eye sockets were filled with Black and the pupils given a dot of more Off-White.

Finally, the hooves and claws were painted Black and highlighted with Charcoal and some Neutral Grey mixed in.

The base was done last. I put blobs of Crayola putty to add some raised areas and glued on a few stones from the drive. The whole base was covered with Stirland Battlemire before being painted with matte varnish to seal it, and was then drybrushed with some Bugman's Glow. I daubed on matte Mod Podge and sprinkled flock over it, and then washed the stones with Athonian Camoshade. After another coat of varnish it was done, and all I had to do was glue the Wolf in place. 

It really is a horrifying and stunning model and once again shows how small 3D print companies can come up with better concepts and models than a global company like Games Workshop. As I've said before, this is what Chaos should look like.

Snow days

After a ridiculously mild winter, Vermont decided to dump a ton of snow on us right on the cusp of spring. These branches touching the top of our hot tub are usually 15-20 feet above it.

Yesterday morning I stuck my 12" steel ruler into the snow on our deck table to see how deep it was. As you can see, it was about 7½ inches. And please don't make "seven inches in the morning" jokes, I got enough of those on Facebook...

Anyway, here's the same table this morning. The ruler is buried, as are the two empty Sprite cans I was using as ashtrays.

Somewhere under this is $300 of firewood. Guess we'll be sticking to the underfloor radiant heat for now.

Here's a creepy one taken at 5am.

Anyway, we're warm and have plenty of food, but the cigarette situation is about five hours from going critical. Not good. Stay tuned for more as I'll be starting the Night Goblins soon!

16 comments:

  1. O wow! That really is a nightmarish sculpt! love the colour choices too.

    Good luck with that snow - we've had umpteen feet upon umpteen feet up in the hills/mountains this year. There's going to be some flooding upcoming once that stuff melts...

    ReplyDelete
    Replies
    1. Thanks, Dai! It really is an amazingly designed model and looks great. The snow is still here but at least we've now had the drive ploughed and can go out :-)

      Delete
  2. That's scary! What a monster! I love the skin tones, pretty well done! The snow is imposing, that last pic is just out of a horror movie!

    ReplyDelete
    Replies
    1. Cheers, Suber! It's horrible, isn't it? LOL!

      Delete
  3. Fantastic work on both rider and beast Matt, the bold pink for the beast sets the the whole piece off. Hope you rectify the lack of smoking, wouldn't hold out well with all those night goblins to paint.

    ReplyDelete
    Replies
    1. I'm happy to report that the drive was ploughed later that day so I was able to get cigs and stock up on coffee :-) The gobbos are coming along nicely!

      Delete
  4. Jeezus! that is the stuff of nightmares and no mistake! great bit of painting on this, but does your wife let you display these things in the house, and more importantly does she sleep with the light on?

    Cheers Roger.

    ReplyDelete
    Replies
    1. Alicia is more than happy not to look at the models, Roger :-) They're all in the spare room where she can't see them LOL!

      Delete
  5. Awesome sculpt Matt, I don't understand why it took you so long to add it to your basket!😉
    It's an unusual looking beast that Destrier and you've certainly done it justice - nice one mate!

    ReplyDelete
    Replies
    1. Thanks, Justin! If I could have added it to the basket any faster I'd have broken the laws of time LOL!

      Delete
  6. John@justneedsvarnishThursday, March 16, 2023

    I'm betting you could give up smoking more easily than you could give up Etsy! And you've dragged me into that mire! ;-) That is a frightening looking mini very nicely painted!

    ReplyDelete
    Replies
    1. You're not wrong, John, given the choice between chucking the cigs and chucking Etsy would be a tough decision :-) I apologise for pulling you into the black hole of money and time that is Etsy but I hope you find some good stuff on your travels :-)

      Delete
  7. WOnderful scilput and imho a good choice in not going for an obvious black steed.The white (ahem) is a little disturbing and along with all the little details on the rider makes for a very sinister looking piece - a thing that nightmares are made of.

    ReplyDelete
    Replies
    1. Cheers, Joe! Black is a very suitable colour for such an evil-looking beast, but then again it's a very stereotypical shade to use for a model like this. I think the paler look is even creepier than black and gives it more of an undead look.

      Delete
  8. This is yet another awesome Etsy find, Matt! Its really an impressive sculpt and design. I'm really enjoying all of the grimdark fantasy minis you've painted lately. I think GW could lean into that a bit more considering how popular things like Dark Souls and Turnip are. You did a fantastic job painting this up and I look forward to seeing what you tackle next! I hope the snow melts away soon too. We've barely gotten any here in Chicago this year though it is still fairly cold here. It was under 20 today with the wind chill so another day in paradise! :)

    ReplyDelete
  9. You're going to hate me (again), but the preview (top) pic had me thinking you had painted the T-Rex from Calvin and Hobbes! And it's so hard for me to unsee, every time I look at that pic!! You did a great job on the mini though, and it will be a fearsome force of Chaos! That is some serious snow you got there. We got some, but only a few inches and it's been gone for awhile now. Love that 5am pic. Reminds me of running around the snowy forests in Alaska at all hours as a teen. :)

    ReplyDelete